Assembly
- Make sure the goofy faces are facing UP (or else the case won't fit)
![](https://cdn.prod.website-files.com/6224feb2b691fa4f14398922/665909c4cbff5a9e9c6d4576_DSCF2715.jpg)
- You may need to slightly bend the pot legs inwards to fit into the hole. Just a lil though.
![](https://cdn.prod.website-files.com/6224feb2b691fa4f14398922/665909d977f8fc13d9e7f4a3_DSCF2716.jpg)
- Switches need at least the center 3 pins soldered. The outer ones are tough due to thermal mass - feel free to skip.
- Place all parts, flip over, and assemble.
- I usually do the switches first, then add the RCA jacks, then the pot (shortest to longest)
![](https://cdn.prod.website-files.com/6224feb2b691fa4f14398922/665909f42f3dc4f15208a340_DSCF2717.jpg)
- Screw it into the case
![](https://cdn.prod.website-files.com/6224feb2b691fa4f14398922/66590a385e1edb98cb12bd17_DSCF1603.jpg)
Extra headers are for experimenting if that's ya jam